CHRYSLER Diagnostic Software Update 2010

CHRYSLER Diagnostic Software Update 2010

CHRYSLER Diagnostic Program for X-431 Product Family V26.01 | 2010-12-29
Compared with the previous version, it has optimized the system structure.

CHRYSLER Diagnostic Program for X-431 Product Family V26.00 | 2010-11-16
Compared with the previous version,
1. The program codes have been added for following systems under the VPW protocol.
PAM, RSM, SAR, SKM, SLA, SRM, and VTS
2. For XCM, BCM, ABS, and HAVC, some program functions have been revised and improved.
3. For the engine system under CAN protocol, some menu position has been adjusted.
4. For the BCM system under CAN protocol, the actuation test menu has been revised.

CHRYSLER Diagnostic Program for X-431 Product Family V25.05 | 2010-09-30
Compared with the previous version,
1. Part of program under the KWP protocol has been revised.
2. The newly-added English contents in the simplified Chinese and traditional Chinese texts of last version (V25.00) have been translated now.
3. For WCM under CAN protocol, the Config Info function has been revised.
4. For DDM under CAN protocol, the actuation test function has been revised.

CHRYSLER Diagnostic Program for X-431 Product Family V25.00 | 2010-06-02
Compared with the previous version, the following systems under CANBUS protocol have been added:
1. The following systems have been added with the diagnostic functions of read DTCs, clear DTCs, read version information, read datastream, and actuation test:
AHLM(Auto Headlamp Leveling Module), DMFL (Left forward Door Module), DMRL (Left Rear Door Module), FSM – Folding Seat Module, HIDT – High Intensity Discharge (headlamp) Translator (two modes).
2. The ASBS(Automatic Sway Bar System) has been added with the diagnostic functions of read DTCs, clear DTCs, read version information, and read datastream;
3. The following systems have been added with the diagnostic functions of read DTCs, clear DTCs, read version information, read datastream, read configuration and actuation test:
AWD(All Wheel Drive)(two modes), HSM – Heated Seat Module(two modes),HFM – Hands Free Module(two modes), and EOM – Electronic Overhead Module.

CHRYSLER Diagnostic Program for X-431 Product Family V24.00| 2010-05-05
Compared with the previous version, the following contents have been added:
1. Oil reset function has been added.
2. CANBUS protocol:
(1). For eight modes of PCM, the functions of Overdrive Switch Test, and Thermistor Test have been added to the mixed functions.
(2). For one mode of CCN, the functions of Service Interval – Diesel, Service Interval – Gas, and Unlock Driver Door On 1st Press have been added to the mixed functions.
(3). For seven modes of ABS, the functions of Reset ECU, and Bleed Brakes have been added to the mixed functions.
(4). For one mode of WCM, the functions of Reset ECU, Program Right Rear Tire Sensor ID, Program Left Front Tire Sensor ID, Program Left Rear Tire Sensor ID, Program Right Front Tire Sensor ID, Program Spare Tire Sensor ID, and TPM Trigger Module Test have been added to the mixed functions.

CHRYSLER Diagnostic Program for X-431 Product Family V23.10 | 2010-04-13
Compared with the previous version, the German program has been improved.

CHRYSLER Diagnostic Program for X-431 Product Family V23.05 | 2010-01-27
Compared with the previous version, the new modes of PCM, TCM, CCN, DDM and PDM systems in CAN BUS protocol are now available with the functions of read version information, read DTCs, clear DTCs, read configuration information, read datastream, actuation test and combination functions.

This entry was posted in diagun info. Bookmark the permalink.