CHRYSLER Diagnostic Software Update 2012

CHRYSLER Diagnostic Software Update 2012

CHRYSLER Diagnostic Software for X-431 Product Family V27.90 | 2012-06-29
Compared with the previous version (V27.85),
1. For 2010 models, the following systems under the CAN protocol have been added with several sub-modes, including read DTCs, clear DTCs, data streams, and version information functions.
(1) PCM: three sub-modes
(2) BCM: four sub-modes
(3) SRS: three sub-modes
(4) CCN: two sub-modes
(5) HAVC: one sub-mode
2. For the PCM system under the CAN protocol, the read freeze frame function has been added to five sub-modes.
3. The main menu has been revised. The automatic searching functions for CAN and non CAN have been merged.
4. The matching function of sub mode has been revised.

CHRYSLER Diagnostic Software for X-431 Product Family V27.85 | 2012-05-02
Compared with the previous version (V27.80),
1. For PCM under CAN protocol, the sub modes have been added with read DTCs, clear DTCs, data streams, version information, and special functions.
2. The multi-language text libraries have been updated.

CHRYSLER Diagnostic Software for X-431 Product Family V27.80 | 2012-03-31
Compared with the previous version (V27.75),
1. For the 2010 model under CAN protocol, the TCM has been added with read DTCs, clear DTCs, data streams, version information, and special functions.
2. The diagnostic software has been optimized.
3. The multi-language text libraries have been updated.

CHRYSLER Diagnostic Software for X-431 Product Family V27.75 | 2012-03-16
Compared with the previous version (V27.70),
1. For non-CAN protocol, the following system test menu have been added
1) DAA system: PCI Amplifier Test, Speaker Output Test, Mute Output Test, Tone Test
2) NAV system: Navigation Voice Test
3) FDCM system: SmartBar Motor Test, LED Test, Input/Output Test
4) MIC system: Cluster Calibration Points
5) VTS system: Instrusion Sensor Test, Door Input Test
2. The text libraries in Chinese, English, German, French, and Arabic have been updated.

CHRYSLER Diagnostic Software for X-431 Product Family V27.70 | 2012-03-02
Compared with the previous version (V27.65),
1. For CAN protocol, the PCM of 2010 model has been added with sub-modes included read DTCs, clear DTCs, data streams, version information, actuation test, special functions and system test.
2. For non-CAN protocol, the system test menu has been added; the BCM has been added with following test items: Panic Mode, Speed Pro Steering Test, Actuate Mode Doors, Primary Fuel Tank Data, and Secondary Fuel Tank Data.
3. The text libraries in Chinese, German, and Arabic have been updated.

CHRYSLER Diagnostic Software for X-431 Product Family V27.65 | 2012-02-16
Compared with the previous version (V27.61),
1. For CAN protocol, the following systems have been added specific functions:
(1) PCM: EGR System Test, Purge Vapors System Test, 2 Prime Gear Clutch Test, Reverse Gear Clutch Test, 1st Gear Clutch Test, Set Engine RPM System Test, 2nd Gear Clutch Test, and 3rd Gear Clutch Test.
(2) EOM: EOM Self Test
(3) AHBM: AHBM Self Test
(4) PEM: Learned Key Location Test, and PEM LF Antennas Verification Test
2. The text libraries in Chinese, English, German, Korean, French and Arabic have been updated.

CHRYSLER Diagnostic Software for X-431 Product Family V27.61 | 2012-01-07
Compared with the previous version (V27.60),
1. For CAN protocol, the following systems have been added specific functions:
1) WCM: Antenna Loop Test.
2) BCM: View Last VTA Trigger Cause Routine.
3) CCN: CCN Self Test.
4) PTS: Sensor Versions, Sensor Wiring Test, Sensor Functional Test.
2. The text libraries in Chinese, German, and French have been updated.

This entry was posted in diagun info. Bookmark the permalink.