Toyota Lexus Diagnostic Software Update 2012

Toyota Lexus Diagnostic Software Update 2012

Toyota/Lexus Diagnostic Software for X-431 Series V46.82 | 2012-07-16
Compared with the previous version (V46.81), the data streams and actuation test functions have been revised.

Toyota/Lexus Diagnostic Software for X-431 Series V46.81 | 2012-07-06
Compared with the previous version (V46.80), the freeze frame function has been revised.

Toyota/Lexus Diagnostic Software for X-431 Series V46.80 | 2012-06-29
Compared with the previous version (V46.70),
1. The read DTCs function has been optimized.
2. For other regions, the option prompt for the manually select model mode has been added.
3. For some immobilizers and pre-collision systems, the actuation test has been revised.

Toyota/Lexus Diagnostic Software for X-431 Series V46.70 | 2012-06-04
Compared with the previous version (V46.60),
1. The quick clear DTCs function has been added, and the actuation test function has been improved.
2. For all systems of Japan region, the quick diagnosis function has been added.
3. For Japan region, the data streams have been added to engine and HV systems; and the DTCs functions have been added to Left rear door and right rear door systems.
4. For Japan region, the small injection general learning and the small injection detailed learning functions have been added; and the nozzle register, the steering angle adjustment and the accumulator pressure drops to zero drive functions have been improved.
5. For the models of other regions, the engine data streams have been improved.
6. The text libraries in Chinese, English, Japanese, German, and French have been updated.

Toyota/Lexus Diagnostic Software for X-431 Product Family V46.60 | 2012-04-27
Compared with the previous version (V46.50),
1. For GS350 and GS450H models, the Multi Bus Gateway, Multi Bus Monitor No.1 and Multi Bus Monitor No.2 have been added. And for SEQUOIA model, the Gateway V has been added.
2. For Engine, ECT, cruise control, hybrid, continuous M/T, multi-mode M/T, etc., systems all data streams have been added.
3. For CAMRY and CROWN models, the working support has been added for the servo motor initialization of A/C system.
4. The data streams of Tire Pressure Monitor have been updated.
5. The menu path of CANBUS protocol GSU mode on the vehicle mode table has been revised.

Toyota/Lexus Diagnostic Software for X-431 Product Family V46.50 | 2012-03-27
Compared with the previous version (V46.42),
1. For the vehicle modes of other regions, the manual selection function has been added.
2. For the CANBUS protocol, some 2012 models have been added with the vehicle modes of ATH, AVV, GRL, GVU, and GWL.
3. For the Japanese operating system of Diagun, the 17PIN and 22PIN diagnostic interfaces have been added.
4. The clear DTCs function has been optimized.
5. For the tire pressure monitoring system, the abnormally displayed registered ID of ID registration function has been revised.
6. For the ABS of Japan region, the abnormal display of steering angle data stream has been revised.

Toyota/Lexus Diagnostic Software for X-431 Product Family V46.42 | 2012-02-21
Compared with the previous version (V46.41),
1. All data streams of engine and ECT system have been added for some Toyota models. Part of data streams algorithms of engine and ECT systems have been updated for part of Toyota models (Toyota RAV4, PREVIA/TARAGO, CAMRY, and AVENSIS, etc).
2. For Toyota HIGHLANDER and CAMRY models, the abnormal display of cruise control system has been revised. And for part of Toyota COROLLA RUMION, HIGHLANDER HV, TUNDRA, and SIENNA, the data streams of cruise control system have been updated.
3. The clear DTCs function has been revised for part of Radar cruise control systems
4. The illegal characters in Japanese text library have been revised.

Toyota/Lexus Diagnostic Software for X-431 Product Family V46.41 | 2012-01-12
Compared with the previous version (V46.40),
1. For the EMPS of Crown and Corolla, etc. models, the following functions have been revised: read DTCs, clear DTCs, steering angle sensor adjustment function, abnormal operating record function.
2. Parts of special function interface have been optimized.
3. For Japan area, the A/C system, and the special function of sonar distance control system have been updated.

Posted in diagun info | Comments Off on Toyota Lexus Diagnostic Software Update 2012

Renault Diagnostic Software Update 2009

Renault Diagnostic Software Update 2009

Renault Diagnostic Program for X-431 Product Family V36.00 | 2009-12-31
Compared with the previous version, the following contents have been added/improved:
1. INJECTION is now available for LAGUNA Ⅱ PH2.
2. 2 types of ABS are now available for LAGUNA Ⅱ PH2.
3. INSTRUMENT PANEL is now available for LAGUNA Ⅱ PH2.
4. UCH is now available for LAGUNA Ⅱ PH2.
5. SRS is now available for LAGUNA Ⅱ PH2.
6. 2 types of AIR CONDITIONING are now available for LAGUNA Ⅱ PH2.
7. 2 types of AUTOMATIC GEARBOX are now available for LAGUNA Ⅱ PH2.
8. PARKING BRAKE is now available for LAGUNA Ⅱ PH2.
9. PARKING ASSISTANCE is now available for LAGUNA Ⅱ PH2.
10. 2 types of INJECTION are now available for MEGANE Ⅱ.
11. 2 types of AUTOMATIC GEARBOX are now available for SCENIC Ⅱ.

Renault Diagnostic Program for X-431 Product Family V35.00 | 2009-11-27
Compared with the previous version, the following contents have been added/improved:
1. SRS is now available for KANGOO/KANGOO MUX.
2. AT is now available for MEGANE Ⅱ.
3. PETROL INJECTION, ABS, UCH, PARKING, INSTRUMENT PANEL and P.A.S are now available for SCENIC Ⅱ.
4. PETROL INJECTION is now available for CLIO Ⅲ.
5. INTERCONNECTION UNIT, AC and IMMOBILISER are now available for CLIO2.
6. DIESEL INJECTION is now available for ESPACE.
7. PETROL INJECTION is now available for LAGUNA Ⅱ.
8. PETROL INJECTION, ABS, UCH, PARKING, INSTRUMENT PANEL, AC, PARKING and TYRE are now available for VEL SATIS.

RENAULT Diagnostic Program for X-431 Product Family V34.00 | 2009-10-27
Compared with the previous version, the following systems are now available for LAGUNA Ⅱ.
ENGINE, AT, ABS, AIRBAG, INSTRUMENT PANEL, AIR CONDITION, DISCHARGE LAMP.

RENAULT Diagnostic Program for X-431 Product Family V33.10 | 2009-08-25
Compared with the previous version, the German program is now available.

RENAULT Diagnostic Program for X-431 Product Family V32.00 | 2009-07-06
Compared with the previous version, the following contents have been added/improved:
1. Three new modes of SRS are now available for MEGANE Ⅱ/SCENIC Ⅱ.
2. A new mode of PAS is now available for MEGANE Ⅱ/SCENIC Ⅱ.
3. A new mode of AIR CONDITIONING is now available for MEGANE Ⅱ/SCENIC Ⅱ.
4. A new mode of INSTRUMENT PANEL is now available for MEGANE Ⅱ.
5. Two new modes of UCH are now available for MEGANE Ⅱ.
6. A new mode of ABS is now available for SCENIC Ⅱ.
7. A new mode of INSTRUMENT PANEL is now available for SCENIC Ⅱ.
8. A new mode of UCH is now available for SCENIC Ⅱ.
9. The DTC base has been optimized.

Posted in diagun info | Comments Off on Renault Diagnostic Software Update 2009

Renault Diagnostic Software Update 2010

Renault Diagnostic Software Update 2010

Renault Diagnostic Program for X-431 Product Family V39.10 | 2010-09-30
Compared with the previous version, the following systems have been added:
1. For CLIO III model: injection, AT, panel (two modes), and PAS.
2. For LAGUNA III model: injection, ABS, parking brake, AC, UCH, UPC, and SRS.
3. For MANENA II model: panel.
4. For MEGNAE III/SCENIC III models: injection, AC, ABS, and PAS.
5. For TWINGO II model: ABS, panel, SRS, UCH, and PAS.

Renault Diagnostic Program for X-431 Product Family V39.00 | 2010-08-30
Compared with the previous version, the following models with specific systems have been added:
1. CLIO III model: ABS, A/T;
2. ESPACE IV PH2 model: PARKING PROX, A/T, INJECTION;
3. KANGOO MUX model: PETROL INJECTION (two modes), CONNECTION UNIT, ABS, A/T;
4. LAGUNA II PH2 model: INJECTION;
5. MANENA II model: ABS;
6. MASTER PH2 model: INJECTION;
7. MEGANE II model: INJECTION;
8. MODUS model: INSTRUMENT PANEL, INJECTION, AC, SRS;
9. SCENIC II model: INJECTION, A/T, ABS;
10. TRAFIC II model: ABS.

Renault Diagnostic Program for X-431 Product Family V38.50 | 2010-07-28
Compared with the previous version, the following contents have been added:
1. ESPACE IV model: the special function for INSTRUMENT PANEL;
2. MODUS model: the read configuration, configuration and special function for INSTRUMENT PANEL;
3. MEGANE II model: the read configuration, configuration and special function for INSTRUMENT PANEL (three modes);
4. SCENIC II model: the read configuration, configuration and special function for INSTRUMENT PANEL;
5. CLIO III model: the read configuration, configuration and special function for SRS;
6. MEGANE II model: the read configuration, configuration and special function for SRS (three modes);
7. CLIO II PH234 model: the read configuration, configuration and special function for SRS;
8. ESPACE IV model: the read configuration, configuration and special function for SRS (two modes);
9. VELSATIS model: key matching function;
10. CLIO II PH234 model: key matching function;
11. CLIO 2 model: key matching function;
12. MASTER PH2 model: key matching function;
13. SCENIC II model: INJECTION system;
14. CLIO II PH234 model: the actuation test for INTERCONNECTION UNIT (three modes).

Renault Diagnostic Program for X-431 Product Family V38.00 | 2010-06-02
Compared with the previous version,
The following contents have been added:
1. For CLIO III model: INJECTION, injector programming;
2. For ESPACE IV PH2 model: UCH, and PANEL;
3. For KANGOO model: DEISEL;
4. For KANGOO MUX model: DEISEL;
5. For LAGUNA II model: LAMP, and injector programming;
6. For LAGUNA II PH2 model: INJECTION, ABS, and UCH;
7. For MODUS model: PAS;
8. For MEGANE II model: LIGHTING, and injector programming;
9. For MASTER PH3 model: SRS, ABS, INJECTION (two modes), and PARKING ASSIS;
10. For TRAFIC II PH2 model: INJECTION, SRS, and UCH;
11. For TRAFIC II model: SRS
12. For SCENIC II model: PARKING ASSIS, and injector programming;
13. For VAL SATIS model: tire programming.
Besides, the Arabic, and Spanish translations have been revised.

Renault Diagnostic Program for X-431 Product Family V37.50 | 2010-03-31
Compared with the previous version, the following contents have been added:
1. For ESPACE IV, the following systems are available:
ABS, AC, SRS, INJECTION(two modes), PANAL, PARKING BRAKE(three modes), LIGHTING, HANDS FREE KIT
2. For CLIO III, the INJECTION and PAS are available;
3. For LAGUNA II PH2, the LIGHTING is available;
4. For SCENIC II, the PARKING ASSISINJECTION and INJECTION are available;
5. The Italian translation has been revised.

Renault Diagnostic Program for X-431 Product Family V37.00 | 2010-02-22
Compared with the previous version, the following contents have been added:
1. For CLIO II PH2, the DIESEL INJECTION is available;
2. For CLIO III, the LIGHTING, ABS, SRS and AUTOMATIC GEARBOX are available;
3. For MEGANE/SCENIC, the TYRES is available;
4. For M_MEGANE II, the SUNROOF is available;
4. For SCENIC II, the SRS and ABS are available;
5. For MODUS, the ABS is available;
6. For MASTER PH2, the DIESEL INJECTION, ABS, INTERCONNECTION UNIT, ENGINE IMMOBILISER, SRS and UCH are available.

Renault Diagnostic Program for X-431 Product Family V36.01 | 2010-02-01
Compared with the previous version, the software configuration has been optimized:

Posted in diagun info | Comments Off on Renault Diagnostic Software Update 2010

Renault Diagnostic Software Update 2011

Renault Diagnostic Software Update 2011

Renault Diagnostic Software for X-431 Product Family V40.40 | 2011-12-15
Compared with the previous version (V40.35),
1. For CLIO II PH 2/3/4, four DIESEL INJECTION modes and three PETROL INJECTION modes have been added.
2. For VEL SATIS, two INSTRUMENT PANEL modes have been added.

Renault Diagnostic Software for X-431 Product Family V40.35 | 2011-12-07
Compared with the previous version (V40.30),
For DUSTER, two modes of UCH and PAS, one mode of AT, TRACKER and 4 WHEELS DRIVE have been added.

Renault Diagnostic Software for X-431 Product Family V40.30 | 2011-11-28
Compared with the previous version (V40.25), the following have been added:
1. For Laguna III, two modes of its engine, two modes of UCH;
2. For ESPACE_IV, one mode of its engine, one mode of AC;
3. For TRAFIC_II_PH2, one mode of its engine
3. Arabic, German and French have been rechecked.

Renault Diagnostic Software for X-431 Product Family V40.25 | 2011-11-08
Compared with the previous version (V40.20), the following have been added:
1. for DUSTER, six modes of its engine, two modes of UCH.
2. for LOGAN, one mode of its engine, one mode of PAS, and two modes of UCH
3. Chinese and French have been rechecked.

Renault Diagnostic Software for X-431 Product Family V40.20 | 2011-11-02
Compared with the previous version (V40.10), the following have been added:
1. For MEGAN III/SCENIC III, 4 modes of its engine; for TRAFIC II PH2, 3 modes of its engine, one mode of its AC; for ESPACE IV, one mode of its AC; for ESPACE IV PH2, 1 mode of its LIGHTING, for MASTER PH3, 3 modes of its engine.
2. Injector programming of MEGANE III; injector programming and idle programming of TRAFIC II PH2.
3. German and French have been updated.

Renault Diagnostic Software for X-431 Product Family V40.10 | 2011-10-14
Compared with the previous version (V40.00), the following have been added:
1. For CLIO III, 5 modes of its engine; for THALIA/SYMBL.2, 5 modes of its engine; for LAGUNA III, 4 modes of its engine; for TRAFIC II PH2, 1 mode of its engine, one mode of SRS, for SCENIC/MEGANE II, one mode of AT.
2. Quick test function for models after 04.

Renault Diagnostic Software for X-431 Product Family V40.00 | 2011-09-30
Compared with the previous version (V39.90),
Seven modes of INJECTION have been added for KANGOO; one mode of UCH has been added for CLIO III; one mode of UPC has been added for MAGANE III.SCENIC III; one mode of instrument panel has been added for MEGANE III.SCENIC III; one mode of AT has been added for TWINGO II.

Renault Diagnostic Software for X-431 Product Family V39.90 | 2011-09-01
Compared with the previous version (V39.80), the following has been improved:
1. For MODUS, one mode of AT system and PARKING ASSIS; two modes of LAGUNA II PH2 Engine; For CLIO III, one mode of AC; for TWINGO II, one mode of PARKING ASSIS; for ESPACE IV, three modes of INJECTION; for ESPACE IV PH2, three modes of INJECTION; for VEL SATIS, one mode of INJECTION; for VEL SATIS PH2, four modes of INJECTION.
2. Fuel injector encoding function and idle programming etc. functions have been added for ESPACE IV, ESPACE IV PH2, VEL SATIS PH2, and LAGUNA II PH2 models.

Renault Diagnostic Software for X-431 Product Family V39.80 | 2011-08-15
Compared with the previous version (V39.70),
1. Four modes for INJECTION system have been added for MODUS and CLIO III models; three modes for INJECTION system have been added for MEGANE II model; two modes for INJECTION system have been added for SCENIC I model.
2. For LOGAN, SANDERO model, the following functions have been added: Fuel injector encoding function, speedometer hand programming, vehicle parameter programming, transmission engine oil replace programming, and UCH computer types programming, etc.

Renault Diagnostic Software for X-431 Product Family V39.70 | 2011-07-22
Compared with the previous version (V39.61),
1. For LOGAN and SANDERO models, INJECTION, ABS, UCH, AT, SRS, and PAS systems are available.
2. The following vehicle systems have been added: SCENIC II model INJECTION system (five modes), MEGANE II model INJECTION system (five modes), KANGOO model INJECTION system (one mode), and KANGOO MUX model INJECTION system (one mode).
3. The injector coding function has been added for SCENIC II, MEGANE II, KANGOO, and KANGOO MUX models

Renault Diagnostic Program for X-431 Product Family V39.61 | 2011-06-23
Compared with the previous version (V39.60),
1. The text library in German has been updated.
2. The text library in Arabic has been updated.

Renault Diagnostic Program for X-431 Product Family V39.60 | 2011-05-19
Compared with the previous version (V39.50),
1. For SCENIC II model, two diagnostic modes have been added for INJECTION.
2. For MEGANE II model, three diagnostic modes and the injector coding function have been added for engine.
3. For ESPACE IV model, one diagnostic mode has been added for INJECTION and ABS respectively.
4. For CLIO III model, one diagnostic mode has been added for INJECTION.
5. For MODUS model, one diagnostic mode has been added for INJECTION.
6. For VEL SATIS PH2 model, five modes have been added for INJECTION.
7. For KANGOO II model, the following systems have been added with diagnostic modes:
(1) INJECTION (3 modes)
(2) UCH (2 modes)
(3) PANEL (1 mode, and service lamp reset function)
(4) AC (1 mode)
(5) AT (1 mode)
(6) SRS (1 mode)
(7) PAS (1 mode)
(8) UPC (1 mode)
(9) PARKING ASSIS (1 mode)
(10) ADAPATION UNIT (1 mode)
8. The text library in French has been updated.

Renault Diagnostic Program for X-431 Product Family V39.50 | 2011-04-14
Compared with the previous version (V39.41), for following specific models, the diagnostic modes have been added for the specific systems:
1. For TWINGO II, CLIO III, MEGANE II, SCENIC II, MODUS models: INJECTION (16 modes).
2. For LAGUNA II PH2 model: INJECTION (1 mode), and UCH (2 modes).
3. For ESPACE IV model: INJECTION (6 modes), and SRS (1 mode).
4. For ESPACE IV PH2 model: INJECTION (1 mode), AT (1 mode), ABS (1 mode), and PARKING ASSIST (1 mode).
5. For MEGANE II model: ABS (2 modes); for CLIO III model: ABS (3 modes); for ESPACE IV PH2 model: ABS (1 mode with configuration, Check target teeth, Bleed hydraulic unit and braking circuits etc., special functions).
6. For MEGANE II model: PAS (3 modes with read configuration, configuration, and steering wheel angle sensor programming etc., special functions). For SCENIC II model: ABS (5 modes). For MODUS model: ABS (2 modes). For LAGUNA II PH2 model: ABS (1 mode with read configuration, configuration, and Check target teeth,Bleed hydraulic unit and braking circuits etc., special functions).
7. For MODUS model: PAS (2 modes); for CLIO III model: PAS (2 modes with read configuration, configuration, and steering wheel angle sensor programming etc., special functions).
8. For LAGUNA II PH2 model: INJECTION (2 modes); for ESPACE IV PH2 model: INJECTION (3 modes); for MASTER PH3 model: INJECTION (2 modes with read configuration, configuration, and Enter Injector Codes etc., special functions).
9. For SCENIC II model: PAS (1 mode with write date of after sales operation special function); for LAGUNA III model: PANEL (1 mode with Distance before next oil change function); for MEGANE III model: INJECTION (1 mode), PAS (1 mode with configuration function), PANEL (1 mode with Distance before next oil change function).
10. For LAGUNA II model: PANEL (1 mode with Distance before next oil change special function).
11. For LAGUNA II PH2 model: UCH (1 mode); for LAGUNA III model: UCH (1 mode); for SCENIC III model: UCH (1 mode); for ESPACE IV PH2 model: UCH (1 mode with Programming a valve code special function); for MODUS model: UCH (1 mode); for CLIO III model: UCH (1 mode with configuration and Program body computer etc., special functions).
12. For LAGUNA III model: INJECTION (2 modes with Enter Injector Codes special function),
13. For ESPACE IV model: ABS (2 modes with Check target teeth etc., special functions), PANEL (1 mode with Oil service and odometry miles-KM special function).
14. For ESPACE IV PH2 model: PANEL (1 mode with Oil service and odometry miles-KM special function; for TRAFFIC II PH2 model: INJECTION (1 mode with commercial vehicle idle speed modification, and Enter Injector Codes etc., special functions, UCH (1 mode with configuration function).
Besides, for MEGANE/SCENIC models, four AT system modes have been revised.

Renault Diagnostic Program for X-431 Product Family V39.41 | 2011-03-16
Compared with the previous version (V39.40), the programs in Turkish and French have been updated.

Renault Diagnostic Program for X-431 Product Family V39.40 | 2011-03-11
Compared with the previous version (V39.30), totally 46 diagnostic modes have been added:
1. For Laguna ii model: injection (three modes)
2. For Laguna ii model: Panel, SRS, AT, and AC (one for each)
3. For 56153 model: injection (one mode), and ABS (two modes)
4. For Clio iii, Koleos, Laguna iii, Mast rwd ph3, Master ph3, Scenic/Megane iii, Twingoo ii, Vel Satis ph2 models: ABS (one mode)
5. For E33 model: injection (one mode), and ABS (two modes)
6. For Kangoo ii model: injection (one mode), and ABS (three modes)
7. For Mast rwd ph3 model: injection (one mode)
8. For Megane ii model: ABS (five modes)
9. For Scenic ii model: ABS (two modes)
10. For Megane ii model: PAS (one mode)
11. For Modus model: ABS (three modes)
12. For Megane/scenic iii model: injection (two modes), and UPC (one mode)
13. For Thalia/symb.2 model: injection and ABS (one for each)
14. For Trafic ii p23 model: injection (one mode), and ABS (three modes)

Renault Diagnostic Program for X-431 Product Family V39.30 | 2011-01-12
Compared with the previous version,
1. For MEGANE II, SCENIC II, and CLIO III, the function of ENTER INJECTORS CODE has been added to several INJECTION modes.
2. For MEGANE II, and SCENIC II, the function of Programming the codes of the four valves has been added to several UCH modes, while, for CLIO III, just added to one UCH mode.
3. For MEGANE II, and SCENIC II, the function of service lamp reset has been added to several PANEL modes.
3. The function of Key programming has been added for KANGOO MUX.
4. The data of several systems have been revised.
5. The software structure has been optimized.
6. The Portuguese program has been revised.
7. For KELEOS, the INJECTION, UCH, SRS, ABS, PANEL, PAS, and UPC systems have been added.
8. For LAGUNA II PH2, two INJECTION modes have been added.

Posted in diagun info | Comments Off on Renault Diagnostic Software Update 2011

Renault Diagnostic Software Update 2012

Renault Diagnostic Software Update 2012

Renault Diagnostic Software for X-431 Product Family V40.66 | 2012-07-12
Compared with the previous version (V40.65), the text library in Spanish has been revised.

Renault Diagnostic Software for X-431 Product Family V40.65 | 2012-06-13
Compared with the previous version (V40.60),
1. The processing mode of special function has been updated.
2. The text libraries in Chinese, French, and German have been revised.

Renault Diagnostic Software for X-431 Product Family V40.60 | 2012-05-03
Compared with the previous version (V40.56),
1. The scan VIN function has been added for identifying models.
2. For MEGANE II model, the following modes have been added:
(1) one engine mode
(2) one ABS mode
(3) one PANEL mode
(4) two UCH modes
(5) one PARK ASSITANCET mode
3. For KOLOES model, one engine mode has been added.

Renault Diagnostic Software for X-431 Product Family V40.56 | 2012-03-30
Compared with the previous version (V40.55), the text library in Italian has been revised.

Renault Diagnostic Software for X-431 Product Family V40.55 | 2012-03-23
Compared with the previous version (V40.50),
1. The following diagnostic modes have been added:
(1) For Clio II model: three connection unit modes
(2) For ESPACE model: two connection unit modes, and one panel mode
(3) For AVANTIME model: one ABS mode, one connection unit mode
(4) For Traffic II model: one engine mode
2. The text libraries in German, French and Chinese have been revised.

Renault Diagnostic Software for X-431 Product Family V40.50 | 2012-02-28
Compared with the previous version (V40.46), the following diagnostic modes have been added:
1) For Avantime model: two engine modes
2) For Master model: three engine modes
3) For Trafic II model: one engine mode
4) For MEGANE_SCENIC model: one ABS mode
5) For CLIO II ph2/3/4 model: one ABS mode

Renault Diagnostic Software for X-431 Product Family V40.46 | 2012-02-10
Compared with the previous version (V40.45), the actuation test and special functions have been added to QuiCheck.

Renault Diagnostic Software for X-431 Product Family V40.45 | 2012-01-07
Compared with the previous version (V40.40),
1. For following models, the specific modes have been added.
KANGOO model: one engine mode
LAGUNA_PHASE_2 model: two engine modes
LAGUNA model: two engine modes
MEGANE_SCENIC model: one engine mode
ESPACE IV PH2 model: one panel mode
ESPACE model: one panel mode
2. The text library in Chinese has been revised.

Posted in diagun info | Comments Off on Renault Diagnostic Software Update 2012

ACURA Diagnostic Software Update

ACURA Diagnostic Software Update

ACURA Diagnostic Software is issued in 16 languages: simplified Chinese, German, English, Spanish, traditional Chinese, Italian, Japanese, Portuguese, Polish, Russian, Turkish, Greek, French, Korean, Arabic, and Farsi.

ACURA Diagnostic Software for X-431 Product Family V10.41 | 2012-07-16
Compared with the previous version (V10.40), for following systems, the specific contents have been updated:
1. For IMA system: system ID, DTCs, data streams.
2. For Smart card key system: system ID, data streams.
3. For TPMS system: system ID, DTCs, data streams, etc.

ACURA Diagnostic Software for X-431 Product Family V10.40 | 2012-06-10
Compared with the previous version (V10.30),
1. The 2011/2012 MDX, ZDX, and RSX, etc., models have been added.
2. For following systems, the system ID, data streams, and DTCs have been updated. Engine, Gearbox, ABS, and EPS
3. For the 2nd generation immobilizer, all keys lost and replace ECM functions have been improved.
4. For the 4th generation immobilizer, replace anti-start device and replace ECM functions have been improved.

ACURA Diagnostic Software for X-431 Product Family V10.30 | 2012-04-13
Compared with the previous version (V10.22),
1. The prompt has been added for the instrument cluster performing instrument control module replacement.
2. For the 4E mode of airbag system, new ID has been added.
3. The DIAGUN in Japanese can display non-16PIN connector.
4. The ISO D product can display non-16PIN connector.

ACURA Diagnostic Software for X-431 Product Family V10.22 | 2012-03-14
Compared with the previous version (V10.21), air-conditioning system has been separated from the vehicle body electric system.

ACURA Diagnostic Software for X-431 Product Family V10.21 | 2012-02-02
Compared with the previous version (V10.20), for ABS system 02 and 03 modes, the following diagnostic functions have been added:

ACURA Diagnostic Software for X-431 Product Family V10.20 | 2012-01-07
Compared with the previous version (V10.10),
1. For engine system 0f mode:
(1) add three multi-solenoids testing functions to EVAP testing;
(2) add one new VTEC test;
(3) add rocker arm oil control solenoid A on/off;
(4) add rocker arm oil control solenoid B on/off; modify VTC test.
2. For engine system 3a mode: modify VTC test, fuel pump shut off, one injector stop; adjusting: modify crankshaft (CKP) sensor matching value learning.
3. For EPS system 1a mode: modify PS signal function; modify torque sensor learning function.

ACURA Diagnostic Software for X-431 Product Family V10.10 | 2011-12-07
Compared with the previous version (V10.01), Instrument System has been added with functions of read DTCs, clear DTCs, read data stream, function test self-diagnosis function.

ACURA Diagnostic Software for X-431 Product Family V10.01 | 2011-10-27
This version is the first version, it can test the following systems of ACURA serials with functions of DTC, data stream, function test, and adjustment etc: Engine system, AT, ABS, SRS, OPDS, SWS, EPS, Body electronics, TPMS, SH-AWD, HONDA intelligent card key system, immobilizer etc.

Posted in Launch x431 Diagun Car list Update | Comments Off on ACURA Diagnostic Software Update

INFINITI Diagnostic Software Update

INFINITI Diagnostic Software Update

INFINITI Diagnostic Software is issued in 16 languages: simplified Chinese, German, English, Spanish, French, traditional Chinese, Italian, Japanese, Portuguese, Polish, Russian, Greek, Korean, Turkish, Farsi, and Arabic.

INFINITI Diagnostic Software for X-431 Product Family V10.30 | 2012-07-17
Compared with the previous version (V10.20),
1. Data streams have been improved for the main systems of INFINITI software, including engine, AT, ABS, BCM.
2. Following INFINITI search modes have been optimized:
(1) Search All System: firstly scan all systems, and then display the scanned system;
(2) Search By System: scan single system, and directly access the system after scanned.
3. Parts of special functions (SERVC REGENERATION, INJ the ADJ VAL REGIST, TPMS) have been improved.

INFINITI Diagnostic Software for X-431 Product Family V10.20 | 2012-05-31
Compared with the previous version (V10.11), the mainstream INFINITI models on major world markets have been added.

INFINITI Diagnostic Software for X-431 Product Family V10.11 | 2012-03-20
Compared with the previous version (V10.10),
1. The connector prompt has been optimized.
2. For 3GIII device, the model icon of INFINITI has been updated.

INFINITI Diagnostic Software for X-431 Product Family V10.10 | 2012-02-17
Compared with the previous version (V10.01), new diagnostic mode has been added and the software structure has been optimized.
1. All systems of INFINITI_G37_COUPE_CV36 model (2008-2011) have been added.
2. All systems of INFINITI_G37_CONVERTI_HV36 model (2009-2011) have been added.

INFINITI Diagnostic Software for X-431 Product Family V10.01 | 2011-10-18
This is the first version, the following have been added:
The following INFINITI models vehicle coverage have been added: FX35/FX45, G20, G35 Coupe, G35 Sedan, I30, I35, M45, Q45, QX4, and I QX56.

Posted in Launch x431 Diagun Car list Update | Comments Off on INFINITI Diagnostic Software Update

Launch x431 diagun operate.mp4

Launch x431 diagun operate

There will show you the simple operate diagun

Posted in Review | Comments Off on Launch x431 diagun operate.mp4

Launch x431 diagun operate 02.mp4

Launch x431 diagun operate 02

Posted in Review | Comments Off on Launch x431 diagun operate 02.mp4

Clean Porsche error codes.mp4

Launch x431 diagun clean Porsche error codes

Posted in Review | Comments Off on Clean Porsche error codes.mp4

Change language polski.mp4

Launch X431 Diagun change language polski.mp4

Posted in Review | Comments Off on Change language polski.mp4

Charge device

launch x431 diagun operation guide Charge device

There are three methods to charge X-431Diagun: one is to use the charger (for details to see 2.3, No.6 in Diagram 2-2), the second is to charge through an external power (DLC) and the last is to charge when connecting to PC through the USB port.

1 Description of the Power Indicator State
Charge through the charger
Charge it under conditions of power off, power on and stand-by mode. The power indicator always come on when charging and goes out when the battery is full.
Note: It is better to charge in stand-by mode for charging saturation. (How to standby: click the start menu “” to find “Suspend”, or press the power key of the main unit. And press again to return the normal state.)

Charge through DLC
Charge it under conditions of power off, power on and stand-by mode. The power indicator always come on when charging and goes out when the battery is full.

Charge by PC
Charge it by connecting to PC through the USB port.

2 Description of the Battery State
2.1. Power on under conditions of being connected with charger or an external power supply. The icon “” will appear in the taskbar. It indicates charging in the power management interface, as shown below:

Note: Click the start button “” in the bottom left-hand corner of the screen,and click “control panel”. With a new window pops up, double click “Power”,and the power management interface appears. You can also double click the battery indication icon to view the power management interface, as shown above.

2.2. When using this equipment without connecting an external power supply, if the battery is more than 40%, no icon appears in the taskbar, and the actual battery will be shown.

2.3. When using this equipment without connecting an external power supply, if the battery is less than 40% and more than 10%, the icon ” ” appears in the taskbar. It shows the actual battery in the power management interface.

2.4. When using this equipment without connecting an external power supply, if the battery is less than 10%, the icon “” appears and indicates the battery is too low.

Posted in Operation Guide | Comments Off on Charge device

Start device

launch x431 diagun guide Start device

1 Power on
Press [POWER] key in the top right-hand corner of the main unit top. Main unit will display the initialization screen, as shown below.
Note: Power off by pressing [POWER] key for 5 seconds at least.

After reading the system bar on the initialization screen, operate following the indication, as shown below.

2.Calibrate Touch Screen
The initialization screen will skip to the calibration screen in 12 seconds, as shown on the left. Click the “+” on the screen accurately and orderly. After it changes, you complete a calibration. If you don’t want to calibrate, press the power key to skip the calibration screen.
Note: If you don’t click “+” accurately, the “+” will be present on the screen again and again, until the calibration completes.

The screen as shown on the left will appear after the touch screen calibration successes. You can click to enter the system interface by manual, or wait for 30 seconds to enter automatically.

3 Taskbar
There is a taskbar at the bottom of X-431Diagun system desktop shown on the below.

A Start Button: the same method as Windows98/XP.
B Network Connection Icon: displays network connection state. (when connected to PC)
C Battery Icon: indicates the battery state. (for details to see 2.6)
D Time: sets the time, data and time zone by double-clicking here with the touch kit.
E Soft Keyboard Icon: displays and hides the soft keyboard, when the soft keyboard is activated, there are two types of input method to select, they are: 1. Manual; 2. English.
F Switch Icon: displays the desktop, and switches among the interfaces.

Posted in Operation Guide | Comments Off on Start device

Update via Internet

launch x431 diagun FAQ Update via Internet

Question: Some downloaded diagnostic program is not listed in the update tool, what is the reason?
Answer: There are two possible causes:
1. The downloaded diagnostic program is not put in the same folder as other diagnostic programs. Please move it to the same folder as others.
2. The diagnostic program is not fully downloaded. Please download the program again.
Question: When the updated software is used in vehicle diagnosis, some diagnostic program can not be downloaded successfully from the TF card.
Why?
Answer: possible causes and solutions:
1. The Display Program may have not been updated. Please update the Display Program.
2. The diagnostic program for the vehicle make is damaged. Please re-download the diagnostic program and update.

Posted in FAQ | Comments Off on Update via Internet

Hardware

launch x431 diagun FAQ Hardware

Question: Why does the LCD screen respond so slowly?
Answer: It is because the ambient temperature is close to the lower limit of operating temperature range (0-50℃). In this situation, it is necessary to warm up the machine for 20 minutes before test.

Question: There is no character on the backlit screen. What should I do?
Answer: Check if the power is well connected. Turn off the machine, unplug the power connector and re-plug it. Turn on the machine after it has been connected to the power for 1 second.

Question: Why does X431Diagun fail in communication with ECU?
Answer: Please make sure that the diagnostic connector and diagnostic program are matching vehicle make.

Question: The screen keeps blank after flashing when the machine is turned on. What should I do?
Answer: Take out the TF card and re-start the machine to see if there is normal display. If the display is normal when the TF card is taken out, the TF card should be replaced. If the screen is still blank, please contact the local service engineer.

Question: Why can’t the data be inputted after Soft Keyboard is activated?
Answer: The position where the cursor lies can’t be edited. Or you have not activated the cursor on the input position. Please use the stylus to click the part to edit. When the cursor twinkles, you can input the data.

Question: Why does the saved data disappear?
Answer: There are two possible causes:
1. Your TF card is damaged.
2. You’ve changed language and the data is related to language. You mayfind the data after switching back to the former language.

Question: The screen does not respond or responds wrongly when I click it with stylus. What should I do?
Answer: It is necessary to calibrate the screen. Please refer to the section 2.5.2 in User’s Manual.

Question: What can I do when the screen is confused?
Answer: Please quit the current application (interface), and run it again. If the problem still exists, please restart the system.

Posted in FAQ | Comments Off on Hardware

System Setting

launch x431 diagun FAQ System Setting

Question: The screen is inactive after the cross cursor appears on the screen. Why?
Answer: The system is calibrating the touch screen. The machine will work after the screen is calibrated. Refer to the section 2.5.2 in User’s Manual.

Question: The screen does not respond or responds wrongly when I click it with stylus. What should I do?
Answer: It is necessary to calibrate the screen. Please refer to the section 2.5.2 in User’s Manual.

Question: The time displayed in the bottom right-hand corner of the screen is incorrect. How to adjust it?
Answer: It is because the time was set incorrectly. Please refer to the section 2.5.3 in User’s Manual to set correct time.

Posted in FAQ | Comments Off on System Setting

Operation

launch x431 diagun FAQ Operation

Question: System halts when reading data stream. What is the reason?
Answer: It may be caused by a slackened connector. Please turn off the machine, firmly connect the connector, and switch on the machine again.

Posted in FAQ | Comments Off on Operation

Launch x431 diagun Update Fiat

Launch x431 diagun Update Fiat Diagnostic Program V17.00 | 2006-06-28
This version is issued in the following 11 languages: simplified Chinese, traditional Chinese, English, French, German, Turkish, Spanish, Italian, Portuguese, Polish and Greek.
Compare with the previous version, the following contents are improved:
1. Added the read version information, read trouble code, clear trouble code and read data stream function for 4 engine systems:
Bosch EDC 15 Diesel injection(2.4 TD d.i.engine)
Magneti Marelli IAW 4GF injection
Lucas Epic DCU3F Diesel Injection
Diesel Bosch EDC15 CF3 injection
2. Added the read version information, read trouble code, clear trouble code and read data stream functionkey for AT/ Automatic Gearbox ZF 4HP20(KW2).
Regarding the detailed applicable systems and corresponding diagnostic functions for this version please refer to ‘x431 tested vehicles’ on the website.

Launch x431 diagun Update Fiat Diagnostic Program V15.05 | 2006-01-20
This version is issued in the following 11 languages: simplified Chinese, traditional Chinese, English, French, German, Turkish, Spanish, Italian, Portuguese, Polish and Greek.
Compared with the previous version, the diagnostic function for “MY 97(2F-2P)”、”MY 97(2F-2P-2L)”、”MY 97(2F-2P-2L-S)”、”MY 97(2F-2P-S)”、”MY 97(2f)”、”MY 97(2f-I)”、”MY 97(2f-2l-I)” is added.
Note: To confirm normal operation of the diagnostic software, when downloading the diagnostic software with this version or higher, please also download the display program with version 14.07 or higher.
After updating, the available systems and corresponding diagnostic functions are as follows:
1. This version are applicable to the following electronic controlled engine systems:
Hitachi MPI [1998 >]
Bosch Motornic M 1.5.5 [1999 >]
Bosch Motronic MP 7.3
Bosch EDC 15 C2 (Common Rail Diesel)
Hitachi DBW
Bosch Motornic ME 7.3H4 [2001 >]
Marelli LAW 4EF / 59F [2001 >] Euro 3
Bosch EDC 15 (Common Rail Diesel)
Marelli LAW 5NF
Bosch EDC 15 CF3 (Common Rail Diesel)
Marelli LAW 4.8P
Bosch EDC 15 C3 (Common Rail Diesel) [2001 >]
Bosch EDC 15 C (Common Rail Diesel)
Magneti Marelli IAW 59F injection
Bosch Motronic Me7.3.1 EOBD injection

Available Functions for each system is: Read version information, Read DTC, Erase DTC, Read data stream and actuation test.
2. This version are applicable to the following ABS systems:
Bosch 5.3
TEVES MK 20
Bosch ABS 5.7
Available Functions for each system is: Read version information, Read DTC, Erase DTC, and Read data stream.

Posted in Launch x431 Diagun Car list Update | Comments Off on Launch x431 diagun Update Fiat

Launch x431 diagun Update CHERY

X-431 CHERY Special diagnostic Program V20.00 | 2006-07-18
This version is available in simplified Chinese and English.
Compared with the previous version, the following contents are improved::
1. Changed the B14 serial to V5 serial, and A520 to A5.
2. Added Delphi DBC 74 version to ABS for Dongfangzhizi serial, with functions: read trouble code, clear trouble code, read data stream, actuation, bleeding mode and version information.
3. Added electronic control system to Mitsubishi engine for Tiggo and diagnostic function of A/T for Mitsubishi.
Note: Because of optimization for software configuration, please download display program V14.10 or higher version to match the diagnostic software of this version or higher version.
Regarding detailed applicable systems and corresponding diagnostic functions, please refer to “x431 tested vehicle” table on the website.

X-431 CHERY Special diagnostic Program V18.01 | 2006-03-02
This version is available in 2 languages: simplified Chinese and English.
Compared with the previous version, the read trouble code function of engine system of A520 is improved.
Regarding detailed applicable systems and corresponding diagnostic functions, please refer to “x431 tested vehicle” table on the website.

Launch x431 diagun Update CHERY diagnostic Program V13.01 | 2005-12-19
This version is available in 2 languages: simplified Chinese and English. Compared with the former version,open chery vehicle special diagnostic Program V13.01 The testable systems and functions for this version program are listed below: Fengyun series 1. engine system 1.1 Marili Single Point System, available functions: trouble code test, clear trouble code, dynamic data flow, actuation test. 1.2 Marili Multi-point System, available functions: trouble code test, clear trouble code, dynamic data flow, actuation test, adaptation regulation, system information. 1.3 Marili Multi-point AAA, available functions: ECU version content, data flow, read trouble code, clear trouble code, and input/output control. 1.4 Marili Multi-point AA9, available functions: ECU version content, data flow, read trouble code, clear trouble code, and input/output control. 1.5 Motorola system, available functions: version content, read trouble code, clear trouble code, read data flow. 1.6 United Electronics M7, available functions: self-diagnosis, system parameter display, system status, actuator test, parameter regulation test, version content. 2, SRS system£?available functions: Read active trouble code, read history trouble code, clear trouble code, read data flow. 3, ABS system£?available functions: check ECU type, read trouble code, clear trouble code, test actuator, basic system setting, read measuring data flow, read data of separate channel, channel regulation match, controller encoding, system logon, transmit chassis No. Qiyun series 1. engine system 1.1 Delphi system, available functions: Trouble code test, clear trouble code, dynamic data flow, actuation test, adaptation regulation, system information. 1.2 Siemens system£?available functions: read power assembly trouble code, read all trouble code, clear power assembly trouble code, clear all trouble code, read data flow, read version content. 2. SRS system£?available functions: Read active trouble code, read history trouble code, clear trouble code, read data flow. 3. ABS system£?available functions: check ECU type, read trouble code, clear trouble code, test actuator, basic system setting, read measuring data flow, read data of separate channel, channel. Son of East series 1. engine system£?available functions: Read trouble code, clear trouble code, read data flow, actuation test. 2. automatic transmission system£?available functions: Read trouble code, clear trouble code, read data flow, actuation test. 3. ABS system, available functions: Trouble code test, clear trouble code, dynamic data flow, actuation test, system information. 4. dash panel system£?available functions: Read meter position, write meter position. 5. SRS system£o 5.1 hae2 airbag£?available functions: Read active trouble code, read history trouble code, clear trouble code, read data flow. 5.2 hae3 airbag£?available functions: Read active trouble code, read history trouble code, clear trouble code, read data flow, ECU ID. 6. intellectual controlled switch£o 6.1 magnus ISU available functions: trouble code test, clear trouble code, dynamic data flow, actuation test, version content. 6.2 Atech ISU available functions: system status, actuation test, immobilizer match. QQ series 1. Engine Electric controlled system 1.1 Siemens 372 Electrical-control system£?available functions: Read trouble code, clear trouble code, read data flow, actuation test, clear learn value, ECU version content. 1.2 United Electronics 465 Electrical system, available functions: Trouble code test, clear trouble code, dynamic data flow, adaptation regulation. 1.3 LiuZhou Machinery factory 465 Electrical system, available functions: Trouble code test, clear trouble code, dynamic data flow, actuation test, adaptation regulation, system information. 1.4Marili372 Electrical system£?available functions: Read trouble code, clear trouble code, read data flow, read system status, actuation test, system information.

Posted in Launch x431 Diagun Car list Update | Comments Off on Launch x431 diagun Update CHERY