Renault Diagnostic Software Update 2011

Renault Diagnostic Software Update 2011

Renault Diagnostic Software for X-431 Product Family V40.40 | 2011-12-15
Compared with the previous version (V40.35),
1. For CLIO II PH 2/3/4, four DIESEL INJECTION modes and three PETROL INJECTION modes have been added.
2. For VEL SATIS, two INSTRUMENT PANEL modes have been added.

Renault Diagnostic Software for X-431 Product Family V40.35 | 2011-12-07
Compared with the previous version (V40.30),
For DUSTER, two modes of UCH and PAS, one mode of AT, TRACKER and 4 WHEELS DRIVE have been added.

Renault Diagnostic Software for X-431 Product Family V40.30 | 2011-11-28
Compared with the previous version (V40.25), the following have been added:
1. For Laguna III, two modes of its engine, two modes of UCH;
2. For ESPACE_IV, one mode of its engine, one mode of AC;
3. For TRAFIC_II_PH2, one mode of its engine
3. Arabic, German and French have been rechecked.

Renault Diagnostic Software for X-431 Product Family V40.25 | 2011-11-08
Compared with the previous version (V40.20), the following have been added:
1. for DUSTER, six modes of its engine, two modes of UCH.
2. for LOGAN, one mode of its engine, one mode of PAS, and two modes of UCH
3. Chinese and French have been rechecked.

Renault Diagnostic Software for X-431 Product Family V40.20 | 2011-11-02
Compared with the previous version (V40.10), the following have been added:
1. For MEGAN III/SCENIC III, 4 modes of its engine; for TRAFIC II PH2, 3 modes of its engine, one mode of its AC; for ESPACE IV, one mode of its AC; for ESPACE IV PH2, 1 mode of its LIGHTING, for MASTER PH3, 3 modes of its engine.
2. Injector programming of MEGANE III; injector programming and idle programming of TRAFIC II PH2.
3. German and French have been updated.

Renault Diagnostic Software for X-431 Product Family V40.10 | 2011-10-14
Compared with the previous version (V40.00), the following have been added:
1. For CLIO III, 5 modes of its engine; for THALIA/SYMBL.2, 5 modes of its engine; for LAGUNA III, 4 modes of its engine; for TRAFIC II PH2, 1 mode of its engine, one mode of SRS, for SCENIC/MEGANE II, one mode of AT.
2. Quick test function for models after 04.

Renault Diagnostic Software for X-431 Product Family V40.00 | 2011-09-30
Compared with the previous version (V39.90),
Seven modes of INJECTION have been added for KANGOO; one mode of UCH has been added for CLIO III; one mode of UPC has been added for MAGANE III.SCENIC III; one mode of instrument panel has been added for MEGANE III.SCENIC III; one mode of AT has been added for TWINGO II.

Renault Diagnostic Software for X-431 Product Family V39.90 | 2011-09-01
Compared with the previous version (V39.80), the following has been improved:
1. For MODUS, one mode of AT system and PARKING ASSIS; two modes of LAGUNA II PH2 Engine; For CLIO III, one mode of AC; for TWINGO II, one mode of PARKING ASSIS; for ESPACE IV, three modes of INJECTION; for ESPACE IV PH2, three modes of INJECTION; for VEL SATIS, one mode of INJECTION; for VEL SATIS PH2, four modes of INJECTION.
2. Fuel injector encoding function and idle programming etc. functions have been added for ESPACE IV, ESPACE IV PH2, VEL SATIS PH2, and LAGUNA II PH2 models.

Renault Diagnostic Software for X-431 Product Family V39.80 | 2011-08-15
Compared with the previous version (V39.70),
1. Four modes for INJECTION system have been added for MODUS and CLIO III models; three modes for INJECTION system have been added for MEGANE II model; two modes for INJECTION system have been added for SCENIC I model.
2. For LOGAN, SANDERO model, the following functions have been added: Fuel injector encoding function, speedometer hand programming, vehicle parameter programming, transmission engine oil replace programming, and UCH computer types programming, etc.

Renault Diagnostic Software for X-431 Product Family V39.70 | 2011-07-22
Compared with the previous version (V39.61),
1. For LOGAN and SANDERO models, INJECTION, ABS, UCH, AT, SRS, and PAS systems are available.
2. The following vehicle systems have been added: SCENIC II model INJECTION system (five modes), MEGANE II model INJECTION system (five modes), KANGOO model INJECTION system (one mode), and KANGOO MUX model INJECTION system (one mode).
3. The injector coding function has been added for SCENIC II, MEGANE II, KANGOO, and KANGOO MUX models

Renault Diagnostic Program for X-431 Product Family V39.61 | 2011-06-23
Compared with the previous version (V39.60),
1. The text library in German has been updated.
2. The text library in Arabic has been updated.

Renault Diagnostic Program for X-431 Product Family V39.60 | 2011-05-19
Compared with the previous version (V39.50),
1. For SCENIC II model, two diagnostic modes have been added for INJECTION.
2. For MEGANE II model, three diagnostic modes and the injector coding function have been added for engine.
3. For ESPACE IV model, one diagnostic mode has been added for INJECTION and ABS respectively.
4. For CLIO III model, one diagnostic mode has been added for INJECTION.
5. For MODUS model, one diagnostic mode has been added for INJECTION.
6. For VEL SATIS PH2 model, five modes have been added for INJECTION.
7. For KANGOO II model, the following systems have been added with diagnostic modes:
(1) INJECTION (3 modes)
(2) UCH (2 modes)
(3) PANEL (1 mode, and service lamp reset function)
(4) AC (1 mode)
(5) AT (1 mode)
(6) SRS (1 mode)
(7) PAS (1 mode)
(8) UPC (1 mode)
(9) PARKING ASSIS (1 mode)
(10) ADAPATION UNIT (1 mode)
8. The text library in French has been updated.

Renault Diagnostic Program for X-431 Product Family V39.50 | 2011-04-14
Compared with the previous version (V39.41), for following specific models, the diagnostic modes have been added for the specific systems:
1. For TWINGO II, CLIO III, MEGANE II, SCENIC II, MODUS models: INJECTION (16 modes).
2. For LAGUNA II PH2 model: INJECTION (1 mode), and UCH (2 modes).
3. For ESPACE IV model: INJECTION (6 modes), and SRS (1 mode).
4. For ESPACE IV PH2 model: INJECTION (1 mode), AT (1 mode), ABS (1 mode), and PARKING ASSIST (1 mode).
5. For MEGANE II model: ABS (2 modes); for CLIO III model: ABS (3 modes); for ESPACE IV PH2 model: ABS (1 mode with configuration, Check target teeth, Bleed hydraulic unit and braking circuits etc., special functions).
6. For MEGANE II model: PAS (3 modes with read configuration, configuration, and steering wheel angle sensor programming etc., special functions). For SCENIC II model: ABS (5 modes). For MODUS model: ABS (2 modes). For LAGUNA II PH2 model: ABS (1 mode with read configuration, configuration, and Check target teeth,Bleed hydraulic unit and braking circuits etc., special functions).
7. For MODUS model: PAS (2 modes); for CLIO III model: PAS (2 modes with read configuration, configuration, and steering wheel angle sensor programming etc., special functions).
8. For LAGUNA II PH2 model: INJECTION (2 modes); for ESPACE IV PH2 model: INJECTION (3 modes); for MASTER PH3 model: INJECTION (2 modes with read configuration, configuration, and Enter Injector Codes etc., special functions).
9. For SCENIC II model: PAS (1 mode with write date of after sales operation special function); for LAGUNA III model: PANEL (1 mode with Distance before next oil change function); for MEGANE III model: INJECTION (1 mode), PAS (1 mode with configuration function), PANEL (1 mode with Distance before next oil change function).
10. For LAGUNA II model: PANEL (1 mode with Distance before next oil change special function).
11. For LAGUNA II PH2 model: UCH (1 mode); for LAGUNA III model: UCH (1 mode); for SCENIC III model: UCH (1 mode); for ESPACE IV PH2 model: UCH (1 mode with Programming a valve code special function); for MODUS model: UCH (1 mode); for CLIO III model: UCH (1 mode with configuration and Program body computer etc., special functions).
12. For LAGUNA III model: INJECTION (2 modes with Enter Injector Codes special function),
13. For ESPACE IV model: ABS (2 modes with Check target teeth etc., special functions), PANEL (1 mode with Oil service and odometry miles-KM special function).
14. For ESPACE IV PH2 model: PANEL (1 mode with Oil service and odometry miles-KM special function; for TRAFFIC II PH2 model: INJECTION (1 mode with commercial vehicle idle speed modification, and Enter Injector Codes etc., special functions, UCH (1 mode with configuration function).
Besides, for MEGANE/SCENIC models, four AT system modes have been revised.

Renault Diagnostic Program for X-431 Product Family V39.41 | 2011-03-16
Compared with the previous version (V39.40), the programs in Turkish and French have been updated.

Renault Diagnostic Program for X-431 Product Family V39.40 | 2011-03-11
Compared with the previous version (V39.30), totally 46 diagnostic modes have been added:
1. For Laguna ii model: injection (three modes)
2. For Laguna ii model: Panel, SRS, AT, and AC (one for each)
3. For 56153 model: injection (one mode), and ABS (two modes)
4. For Clio iii, Koleos, Laguna iii, Mast rwd ph3, Master ph3, Scenic/Megane iii, Twingoo ii, Vel Satis ph2 models: ABS (one mode)
5. For E33 model: injection (one mode), and ABS (two modes)
6. For Kangoo ii model: injection (one mode), and ABS (three modes)
7. For Mast rwd ph3 model: injection (one mode)
8. For Megane ii model: ABS (five modes)
9. For Scenic ii model: ABS (two modes)
10. For Megane ii model: PAS (one mode)
11. For Modus model: ABS (three modes)
12. For Megane/scenic iii model: injection (two modes), and UPC (one mode)
13. For Thalia/symb.2 model: injection and ABS (one for each)
14. For Trafic ii p23 model: injection (one mode), and ABS (three modes)

Renault Diagnostic Program for X-431 Product Family V39.30 | 2011-01-12
Compared with the previous version,
1. For MEGANE II, SCENIC II, and CLIO III, the function of ENTER INJECTORS CODE has been added to several INJECTION modes.
2. For MEGANE II, and SCENIC II, the function of Programming the codes of the four valves has been added to several UCH modes, while, for CLIO III, just added to one UCH mode.
3. For MEGANE II, and SCENIC II, the function of service lamp reset has been added to several PANEL modes.
3. The function of Key programming has been added for KANGOO MUX.
4. The data of several systems have been revised.
5. The software structure has been optimized.
6. The Portuguese program has been revised.
7. For KELEOS, the INJECTION, UCH, SRS, ABS, PANEL, PAS, and UPC systems have been added.
8. For LAGUNA II PH2, two INJECTION modes have been added.

This entry was posted in diagun info. Bookmark the permalink.